Main Features
1.Full-coverage cleaning and disinfection
-A concave-mirror designed cover of the washing and disinfection chamber ensures the full immersion of all parts in the disinfectant solution during every operating cycle of the machine, including the endoscope surface and interior, disinfection chamber and its cover, piping and connectors for air/liquid inlets and leakage-detection.Circulating water flows maintain a continuous washing and disinfection of all the internal cavities of endoscopes and other components. There will be a minimum amount of bubbles even in continuous rinsing because the full coverage and immersion leaves no room for air (as shown in the following picture) .
2.Circulation washing pump
-Provide a continuous washing and disinfection of endoscope surfaces and all pipe interiors of air-inlet, water-inlet, biopsy and suction tubes, avoiding the formation of bacterial biofilm.
3.Sterile water rinsing
-A built-in sterile water filter prevents used and unclean rinsing water from contaminating the disinfected endoscopes.
4.Thermostatic control of disinfectant
-Thermostatic control ensures the cleaning and disinfection efficacy unaffected by the ambient temperature,as all disinfectants’performance declines as temperature drops. As found by Biotech-Germande:at room temperature (22°C), the population reduction of mycobacterium is between Log104 and Log105 after a 45 minutes’exposure in 2% glutaraldehyde solution. However,at 45°C,the reduction value could reach Log106 in less than 5 minutes, by using 0.15% glutaraldehyde solution.
