Tel.: + 86 13912963835

En
En

Autoclaves

MD·JD-600S pulsating vacuum autoclave
MD·JD-600S pulsating vacuum autoclave
MD·JD-600S pulsating vacuum autoclave
MD·JD-600S pulsating vacuum autoclave

MD·JD-600S pulsating vacuum autoclave

MD·JD-600S pulsating vacuum autoclave uses saturated steam as the sterilization medium, through the way of pulsating vacuum, the saturated steam can completely penetrate the surface of the article, and use the high-temperature saturated steam under high pressure to kill all microorganisms and their spores,The sterilization effect is reliable and it is the most effective method inphysical sterilization. The Impact of cold air on temperature is eliminated by means of pulsating vacuum exhaust, and finally vacuum dehumidification combined with jacket dryiing of sterilized items


Share:

Main features

-Double door access type

-Horizontal sterilization chamber, rectangular section, European (GETINGE)

annular reinforcing rib jacket structure

-The bottom surface of the inner chamber adopts a sinking funnel process designtoensure the discharge of condensed water in the inner chamber;

- The materials that come into contact with steam, such as the inner tank and door

panel, are all S30408 stainless steel

-Unique pulsation vacuum process: negative pressure pulsation, trans-pressurepulsation

-The inner chamber can choose independent steam inlet design, multi-channel steaminlet design

-Pipeline system: 304 stainless steel sanitary pipe, clamp connection, all welds arewelded by automatic pipe welding machine;

-It has an automatic adjustment system for the drainage temperature, andthedrainage temperature is less than or equal to 55℃. (Water tank temperature control discharge)

-Air filter: The filtration precision is ≤0.22 microns, and the sterilizationratereaches 99.97%.

-The outer decorative cover is made of mirror frosted anti-fingerprint 304 stainless

steel, the surface is easy to clean.



Specification

Chamber design press -0.1~0.3Mpa
Chamber safety valve pressure 0.28Mpa
Jacket design pressure 0.3Mpa
Jacket safety valve pressure 0.28Mpa
Set tempreture 150℃
Max working temp 139℃
Temperature uniformit ±0.5℃
Temperature control accuracy 0-2℃
Max working press 0.28Mpa
Vacuum leak rates ≤0.13KPa/min
Negative pressure pulse vacuum Amplitude : -80~0KPa, Times : 1-99
Pulsations across pressure Amplitude : -80-80KPa ,Times : 1
Ultimate vacuum -96KPa
Positive pressure pulsation times 1~3




Inquiry Basket
(0)

Need a Turnkey Hospital Solution?

From Blueprint to Operation – Let’s Build Your Dream Hospital

Request Proposal